LS2 Challenger GT Propeller Helmet.
We are proud to introduce the Challenger. Fit. Finish. Function. Performance. The Challenger will face the competition head-to-head and feature-for-feature. Bold and unafraid. Our advanced design takes the lessons from the past and adds the technology of the future. Aerodynamic yet stable, the shell cuts through the air smoothly, keeping the rider energized and able to focus on the road ahead. The Challenger’s shell is made from our High-Performance Fiberglass Composite (HPFC), an advanced, proprietary fiberglass blend that is ultra-light and extremely strong, with a slight amount of flex designed to diminish and offset kinetic energy. LS2 artisans combine uniquely developed hand layups with advanced, computer-controlled technology to build the ultimate high-performance shell. LS2 uses laser technology to cut all holes in the shell with such tight tolerances that there is no need for glue or dual sided adhesives. All vents and gaskets mount with a precision fit. The eye port gasket on the Challenger uses another LS2 proprietary technology, double injection. The thin soft outer layer is bonded in the injection process to the stronger inner material, allowing for a superior seal at the face shield. Dual, fully adjustable intake ports at the top are Matched via our channeled EPS to closeable exhaust ports at the rear. When paired with our flow separator spoiler and side venturis, the rider will enjoy true, dynamic airflow. The adjustable chin vent is dual-ported to assist with keeping the shield free from fog, while also keeping the rider cool and comfortable. Utilizing only optically correct Class A polycarbonate, the Challenger is prepared for battle. The eye port is extra wide to allow the rider to see the competition at their side, whether another motorcycle or an automobile. It is also extra tall, so they can tuck-in tight while being able to see farther down track with less strain on their neck. The high performance, flat shield securely locks closed and is easily changed using our advanced quick release system. For the ultimate in fog fighting technology, the LS2 Challenger utilizes Pinlock Max, ensuring clear vision under the worst of conditions. LONG OVAL FIT. Meets or exceeds DOT FMVSS 218 and ECE 22.05 certification.
- Aerodynamic and stable shell built from High Performance Fiberglass Composite (HPFC), meets or exceeds DOT FMVSS 218 and ECE 22.05 certification
- Eye port is the tallest in the industry, allowing the rider to use their eyes when tucked for less neck strain
- Advanced Laser Cutting Shell Technology – no glue or dual sided tape
- LS2’s proprietary quick release shield change system, the simplest and easiest to use on the market
- Pinlock Max insert included
Measuring for a motorcycle helmet is important. Get a helmet that is too small, and you’ll end up with a headache and a very uncomfortable ride. Get one that is too big, and you might as well wear a hat, since that’s about all the protection you’ll enjoy. A helmet needs to fit properly, with a very slight movement when tugged by your hand. So getting the right size measurement of your head is very important.
|20 7/8 - 21 1/4 in
|21 5/8 - 22 in
|22 1/2 - 22 7/8 in
|23 1/4 - 23 5/8 in
|24 - 24 3/8 in
|24 3/4 - 25 1/4 in
|25 5/8 - 26 in