Vance VS205GB Slanted Black and Grey Concealed Carry Braided Motorcycle Saddlebags.
Dimensions: 14 3/4" L x 5 1/2" W x 10 1/4" H (tallest side)
- Universal fitting on ALMOST ANY TYPE of motorcycle
- Quick-release closure
- Braid and stud accents
- Carry handle
- Rigid back to hold shape
- Main compartment plus two additional inside pockets
- Main compartment plus additional inside pocket and concealed carry pocket
Measure distance horizontally from the edge of the rear turn signal to where the passenger would be aligned on the seat. Next, measure the distance vertically from the exhaust pipe to approximately two inches below the top of the rear fender.
*Please remember to allow at least one inch clearance between the bottom of the saddlebag and the exhaust pipe. This will prevent the saddlebag from being damaged by touching the exhaust pipe.
Generally, to install throw-over saddlebags to your bike, you would need to remove the passenger seat. You would then ensure that the hook and loop connectors are firmly pressed together and secure bonding the two bags. To ensure additional stability, use the strap at the top of one saddlebag and thread through the double d-ring on the other saddlebag. Place the saddlebags on the top of your bike and adjust to how you want the bags to sit. After this is complete, re-install your passenger seat back on the bike. There are additional straps on the bottom of the saddlebags for added security and stability as well.